Micro Boring Head 25-250 mm

 Home Metlartis  - Products - Micro Boring Head 25-250 mm
Micro Boring Head 25-250 mm

Micro Boring Head 25-250 mm

Technical Specifications:

● Boring range (mm) 25-250
● Boring Hole (mm) 25
● Graduation 1 Div.= 0.01
● Tools Shank Dia 25 mm CCMT09 Boring Bar Right Hand- 1 nos.; Left Hand- 1 nos.

Inclusions:

1. Micro Boring Head Dia 100 mm: 1 nos.
2. Shank (as per order/selection): 1 nos.
3. Boring Bars CCMT09 Dia 25 mm- 2 nos.
4. LN Keys: 3, 4, 6 mm (1 each)
5. Torx Flag Keys T8

BTBH25100-IT2

Description

Tool Included

Boring range (mm) Boring hole(mm) Graduation Tools shank dia 25 mm
25-250 25 1 Div.= 0.01 CCMT09 Boring Tool Right Hand and Left Hand

 

Boring range (mm) Boring length (mm) Adaptable insert
25 – 180 75 CCMT09
125 – 250 N/A CCMT09

 

Ordering code Shank / Adaptor
BTBH25100-R8-IT2 R8 / M1TR (M12 × 1.5)
BTBH25100-MT3-IT2 MT3 (M12 × 1.75)
BTBH25100-ISO30-IT2 ISO30 (M12 × 1.75) ISO DIN 2080
BTBH25100-ISO40-IT2 ISO40 (M16) ISO DIN 2080
BTBH25100-ISO50-IT2 ISO50 (M24) ISO DIN 2080
BTBH25100-BT40-IT2 BT40 (M16) BT-MAS 403
BTBH25100-BT50-IT2 BT50 (M24) BT-MAS 403
BTBH25100-CAT40-IT2 CAT40 (5/8″) CAT ANSI B5.50

1. Dia 100 mm Micro Boring Head Kit is a big size unit for boring large diameters at greater depths. It can be used to bore sizes from 25 mm to up to 250 mm using a set of CCMT09 Right Hand and Left Hand Indexable Tools.

2. The slide is hardened and ground which ensures its stable and sturdy and also increases the longevity of the unit. There are two vertical holes and a horizontal hole of 25 mm.

3. The vertical holes can bore from 25 mm to up to 180 mm. With an offset of 40 mm, the unit can bore a maximum diameter of 250 mm using a left hand tool in the horizontal hole.

4. The lead screw has an adjustment of 0.01 mm per division which gives and adjustment of 20 microns on the diameter.

5. It comes pre-fitted with a taper shank as per requirement.

6. The boring kit comes with 1 nos. Dia 25 mm CCMT09 Right Hand Tools and 1 Nos. CCMT09 Left Hand Tool:
1. Dia 25 mm CCMT09 Right Hand- 1 nos.
2. Dia 25 mm CCMT09 Left Hand- 1 nos.

7. Inserts are to be purchased separately depending on the material to be machined.

INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage.

Additional information

Shank/ Adaptor

R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BT- MAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50

Reviews

There are no reviews yet.

Be the first to review “Micro Boring Head 25-250 mm”

Your email address will not be published. Required fields are marked *

Related products

  • Read more
    Quick View
    Compare
    Micro Boring Head 10-180 mm with 5 nos. TPGH09/11 Indexable Tool
    Micro Boring Head

    Micro Boring Head 10-180 mm with 5 nos. TPGH09/11 Indexable Tool
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole(mm) Graduation Tools shank dia 20 mm
    10-175 20 1 Div.= 0.01 TPGH09 Boring Bar R/H- 4 nos. TPGH11 Boring Bar L/H- 1 nos.
     
    Boring range (mm) Boring length(mm) Adaptable insert
    10-12 40 TPGX0902
    12-16 48 TPGX0902
    16-50 64 TPGX0902
    20-125 74 TPGX0902
    105-175 N/A TPGX1102
     
    Ordering code Shank/Adaptor
    BTBH2075-R8-IT5 R8/M1TR (M12×1.5)
    BTBH2075-MT3-IT5 MT3 (M12×1.75)
    BTBH2075-ISO30-IT5 ISO30 (M12×1.75) ISO DIN 2080
    BTBH2075-ISO40-IT5 ISO40 (M16) ISO DIN 2080
    BTBH2075-ISO50-IT5 ISO50 (M24) ISO DIN 2080
    BTBH2075-BT40-IT5 BT40 (M16) BT–MAS 403
    BTBH2075-BT50-IT5 BT50 (M24) BT–MAS 403
    BTBH2075-CAT40-IT5 CAT40 (5/8”) CAT ANSI B5.50
    1.Dia 75 mm Micro Boring Head Kit is a sturdy unit for boring large diameters. It can be used to bore sizes from 10 mm to up to 175 mm using a set of TPGX09/TPGX11 Indexable Tools. 2. This is very useful for boring deeper bores with depths of up to 80 mm. 3. The slide is hardened and ground which ensures its stable and sturdy and also increases the longevity of the unit. 4. There are two vertical holes and a horizontal hole of 20 mm. The vertical holes can take tools of shank dia 20 mm and bore from 10 mm to up to 125 mm. With an offset of 25 mm, the unit can bore a maximum diameter of 150 mm using a left hand tool in the horizontal hole. 5. The lead screw has an adjustment of 0.01 mm per division which gives and adjustment of 20 micron on the diameter. 6. It comes pre-fitted with a taper shank as per requirement. 7. The boring kit comes with 4 nos. Dia 20 mm TPGX09 Right Hand Tools and 1 Nos. TPGX1102 Left Hand Tool: 1. Entry Dia 10 mm X Boring Length 40 mm TPGX0902- 1 nos. 2. Entry Dia 12 mm X Boring Length 48 mm TPGX0902- 1 nos. 3. Entry Dia 16 mm X Boring Length64 mm TPGX0902- 1 nos. 4. Entry Dia 20 mm X Boring Length 80 mm TPGX0902- 1 nos. 5. Entry Dia 105 mm TPGX1102- 1 nos. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage.
    Quick View
  • Read more
    Quick View
    Compare
    Micro Boring Head 10-125 mm
    Micro Boring Head

    Micro Boring Head 10-125 mm
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole(mm) Graduation Tools shank dia 12 mm
    10-125 12 1 Div.= 0.01 Set of 3 Indexable Tools
     
    Boring range (mm) Boring length (mm0 Adaptable insert
    10-12 40 TPGX0902
    12-100 50 TPGX0902
    92-125 N/A TPGX0902
     
    Ordering code Shank/adaptor
    BTBH1262-R8-IT3R8 R8/M1TR (M12X1.5)
    BTBH1262-MT3-IT3 MT3 (M12X1.75)
    BTBH1262-ISO30- IT3 ISO30 (M12X1.75) ISO DIN 2080
    BTBH1262-ISO40- IT3 ISO40 (M16) ISO DIN 2080
    BTBH1262-BT40- IT3 BT40 (M16) BTMAS 403
    BTBH1262-CAT40- IT3 CAT40 (5/8”) CAT ANSI B5.50
    Dia 62 mm Micro Boring Head Kit with a boring capacity of 10-125 mm is a versatile unit and is a must for any Tool Room workshop. 1. With two vertical holes of 12 mm, the unit can take tools with shank dia 12 mm (right hand tools) and one can also use the horizontal hole (with a left hand tool) for making larger bores. 2. The lead screw has an adjustment of 0.01 mm per division which gives an adjustment of 20 microns on the diameter. 3. It comes pre-fitted with a taper shank as per requirement. 4. The unit is hardened and ground to ensure sturdity and increased longevity. 5. The Boring Kit comes with 2 nos. Right Hand Indexable Tools (TPGX0902) with shank Dia 12 mm and a Left Hand Tool. 1. Entry Dia 10 mm X Boring Length 40 mm- 1 nos. 2. Entry Dia 12 mm X Boring Length 50 mm- 1 nos. 3. Entry Dia 92 mm TPGX0902- 1 nos. 6. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage.
    Quick View
  • Read more
    Quick View
    Compare
    Finish Boring Head 6-85 mm with Finish Cartridge, Modular Adaptor and Set of Indexable Tools- 5 Micron
    Micro Boring Head

    Finish Boring Head 6-85 mm with Finish Cartridge, Modular Adaptor and Set of Indexable Tools- 5 Micron
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole(mm) Graduation Tools shank dia 16 mm Finish cartridge
    6-85 16 1 div.= 0.005 Set of 6 Indexable Tools TPGX09/ CCMT09
     
    Boring range (mm) Boring length(mm) Adaptable insert
    6-10 18 WCGT02
    8-12 24 WCGT02
    10-14 40 TPGX0902
    12-100 48 TPGX0902
    16-10 64 TPGX0902
    20-85 72 TPGX0902
     
    Ordering code Shank/adaptor
    BTBH1262-5M-BT40-IT6 BT40 (M16) BTMAS 403
    BTBH1262-5M-CAT40-IT6 CAT40 (5/8”) CAT ANSI B5.50
    BTBH1262-5M-BT50-IT6 BT50 (M24) BTMAS 403
    1. Finish Boring Head Dia 62 mm with a boring capacity of 6-85 mm is an ideal unit for production operations requiring repeatability for batch production jobs. 2. The Unit come with a Finish Cartridge in TPGX09/ TCMT09 or CCMT09. 3. With a single vertical holes of 16 mm, the unit can take tools with shank dia 16 mm (right hand tools). 4. The lead screw has an adjustment of 0.005 mm per division which gives an adjustment of 10 microns on the diameter. 5. The unit is hardened and ground to ensure sturdity and increased longevity. 6. It comes pre-fitted with a Modular Taper Shank like BT40, BT50, SK40, SK50 or HSK Tapers, with working length from 70 to 200 mm, as per requirement. 7. The Boring Kit comes with 6 nos. Right Hand Indexable Tools (WCGT02/TPGX0902) with shank Dia 16 mm. 8. WCGT02 Entry Dia 6 X Boring Length 18 mm- 1 Nos. 9. WCGT02 Entry Dia 8 X Boring Length 24 mm- 1 Nos. 10.TPGX09 Entry Dia 10 mm X Boring Length 40 mm- 1 nos. 11. TPGX09 Entry Dia 12 mm X Boring Length 48 mm- 1 nos. 12.TPGX09 Entry Dia 16 mm X Boring Length 64 mm- 1 nos. 13.TPGX09 Entry Dia 20 mm X Boring Length 72 mm- 1 nos. 14.Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage.
    Quick View
  • Read more
    Quick View
    Compare
    Finish Boring Bar CAT40 with Micro Boring Unit TPGX09
    Micro Boring Head

    Finish Boring Bar CAT40 with Micro Boring Unit TPGX09
    Read more
    Quick View
    Tool Included
    Adaptable insert
    TPGX0902
     
    Ordering code Shank/adaptor
    BTFBB-BT40-100L BT40 (M16X2)
    BTFBB-CAT40-100L CAT40 (5/8")
    BTFBB-BT50-100L BT50 (M24)
    1. Finish Boring Bar with Micro Boring Unit TPGX09/ TCMT09 are ideal for production or batch operations in NC controlled machines. 2. Working length can be from 50-200 mm depending on boring size required and machine spindle taper. 3. The adjustment is 0.002 mm on the diameter thus allowing for precision bores to made. 4. The boring range is plus minus 0.5 mm. 5. Tapers available are BT40, CAT40, SK40, BT50, CAT50, SK50 INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage.
    Quick View