Shop

 Home Metlartis  - Shop
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head 25-250 mm
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole(mm) Graduation Tools shank dia 25 mm
    25-250 25 1 Div.= 0.01 CCMT09 Boring Tool Right Hand and Left Hand
     
    Boring range (mm) Boring length (mm) Adaptable insert
    25 – 180 75 CCMT09
    125 – 250 N/A CCMT09
     
    Ordering code Shank / Adaptor
    BTBH25100-R8-IT2 R8 / M1TR (M12 × 1.5)
    BTBH25100-MT3-IT2 MT3 (M12 × 1.75)
    BTBH25100-ISO30-IT2 ISO30 (M12 × 1.75) ISO DIN 2080
    BTBH25100-ISO40-IT2 ISO40 (M16) ISO DIN 2080
    BTBH25100-ISO50-IT2 ISO50 (M24) ISO DIN 2080
    BTBH25100-BT40-IT2 BT40 (M16) BT-MAS 403
    BTBH25100-BT50-IT2 BT50 (M24) BT-MAS 403
    BTBH25100-CAT40-IT2 CAT40 (5/8″) CAT ANSI B5.50
      1. Dia 100 mm Micro Boring Head Kit is a big size unit for boring large diameters at greater depths. It can be used to bore sizes from 25 mm to up to 250 mm using a set of CCMT09 Right Hand and Left Hand Indexable Tools. 2. The slide is hardened and ground which ensures its stable and sturdy and also increases the longevity of the unit. There are two vertical holes and a horizontal hole of 25 mm. 3. The vertical holes can bore from 25 mm to up to 180 mm. With an offset of 40 mm, the unit can bore a maximum diameter of 250 mm using a left hand tool in the horizontal hole. 4. The lead screw has an adjustment of 0.01 mm per division which gives and adjustment of 20 microns on the diamter. 5. It comes pre-fitted with a taper shank as per requirement. 6. The boring kit comes with 1 nos. Dia 25 mm CCMT09 Right Hand Tools and 1 Nos. CCMT09 Left Hand Tool: 1. Dia 25 mm CCMT09 Right Hand- 1 nos. 2. Dia 25 mm CCMT09 Left Hand- 1 nos. 7. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BT- MAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head 6-125 mm with BT40 Shank and 6 Nos. TPGX09 Indexable Tools
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole (mm) Graduation / Div. Tools Shank dia. 12 mm 
    6 – 125 12 1 (Div. = 0.01) Set of 6 indexable tools
     
    Boring range (mm) Boring length (mm) Adaptable insert
    6 – 8 29 WCGT 0201
    8 – 10 37 WCGT 0201
    10 – 12 40 TPGX 0902
    12 – 100 50 TPGX 0902
    16 – 100 60 TPGX 0902
    92 – 125 N/A TPGX 0902
     
    Ordering code Shank / Adaptor
    BTBH1262-BT40-IT6 BT40 (M16) BT-MAS 403
      1. Dia 62 mm Micro Boring Head Kit with a boring capacity of 6-125 mm is a versatile unit and is a must for any Tool Room workshop. 2. With two vertical holes of 12 mm, the unit can take tools with shank dia 12 mm (right hand tools) and one can also use the horizontal hole (with a left hand tool) for making larger bores. 3. The lead screw has an adjustment of 0.01 mm per division which gives an adjustment of 20 microns on the diameter. 4. It comes pre-fitted with a BT40 Taper Shank (drawbar threadM16X2) 5. The unit is hardened and ground to ensure sturdity and increases longevity. 6. The Boring Kit comes with 5 nos. Right Hand Indexable Tools with shank Dia 12 mm and 1 Left Hand Tool 1. Entry Dia 6 mm X Boring Length 29 mm- WCGT 0201- 1 nos. 2. Entry Dia 8 mm X Boring Length 37 mm- WCGT 0201- 1 nos. 3. Entry Dia 10 mm X Boring Length 40 mm TPGX0902- 1 nos. 4. Entry Dia 12 mm X Boring Length 50 mm TPGX0902- 1 nos. 5. Entry Dia 16 mm X Boring Length 60 mm TPGX0902- 1 nos. 6. Entry Dia 92 mm TPGX0902- 1 nos. 7. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head 6-125 mm with CAT40 Shank and 6 Nos. TPGX09 Indexable Tools
    Read more
    Quick View
    Tool Included
    Boring range (mm) Boring hole (mm) Graduation / Div. Tools Shank dia 12 mm.
    6 – 125 12 1 (Div. = 0.01) Set of 6 indexable tools
     
    Boring range (mm) Boring length (mm) Adaptable insert
    6 – 8 29 WCGT 0201
    8 – 10 37 WCGT 0201
    10 – 12 40 TPGX 0902
    12 – 100 50 TPGX 0902
    16 – 100 60 TPGX 0902
    92 – 125 N/A TPGX 0902
     
    Ordering code Shank / Adaptor
    BTBH1262-CAT40-IT6 CAT40 (5/8″) CAT ANSI B5.50
      1.Dia 62 mm Micro Boring Head Kit with a boring capacity of 6-125 mm is a versatile unit and is a must for any Tool Room workshop. 2. With two vertical holes of 12 mm, the unit can take tools with shank dia 12 mm (right hand tools) and one can also use the horizontal hole (with a left hand tool) for making larger bores. 3. The lead screw has an adjustment of 0.01 mm per division which gives an adjustment of 20 microns on the diameter. 4. It comes pre-fitted with a CAT40 Taper Shank (drawbar thread5/8” X 20 UNF) 5. The unit is hardened and ground to ensure sturdity and increases longevity. 6. The Boring Kit comes with 5 nos. Right Hand Indexable Tools with shank Dia 12 mm and 1 Left Hand Tool 1. Entry Dia 6 mm X Boring Length 29 mm- WCGT 0201- 1 nos. 2. Entry Dia 8 mm X Boring Length 37 mm- WCGT 0201- 1 nos. 3. Entry Dia 10 mm X Boring Length 40 mm TPGX0902- 1 nos. 4. Entry Dia 12 mm X Boring Length 50 mm TPGX0902- 1 nos. 5. Entry Dia 16 mm X Boring Length 60 mm TPGX0902- 1 nos. 6. Entry Dia 92 mm TPGX0902- 1 nos. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Part Description
    Shank / Adaptor CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head Dia 3″ with Adaptor
    Read more
    Quick View
    Tool Included
    Boring Range (mm) Boring Hole (mm) Graduation
    3/4" – 5" 3/4" 1 Div. = 0.001 thou
     
    Ordering Code Shank / Adaptor
    BTBH3"-R8 R8 / M1TR (7/16")
    BTBH3"-MT3 MT3 (M12×1.75)
    BTBH3"-ISO30 ISO30 (M12×1.75) ISO DIN 2080
    BTBH3"-ISO40 ISO40 (M16) ISO DIN 2080
    BTBH3"-ISO50 ISO50 (M24) ISO DIN 2080
    BTBH3"-BT40 BT40 (M16) BT–MAS 403
    BTBH3"-BT50 BT50 (M24) BT–MAS 403
    BTBH3"-CAT40 CAT40 (5/8”) CAT ANSI B5.50
      1. Dia 3″ Micro Boring Head Kit is a sturdy unit for boring large diameters. It can be used to bore sizes from 3/4″ to up to 5″. 2. This is very useful for boring deeper bores with depths of up to 3-1/4″. 3. The slide is hardened and ground which ensures its stable and sturdy and also increases the longevity of the unit. 4. There are two vertical holes and a horizontal hole of 3/4″. The vertical holes can take tools of shank dia 3/4″ and bore from 3/4″ to up to 5″. With an offset of 1″, the unit can bore a maximum diameter of 6″ using a left hand tool in the horizontal hole. 5. The lead screw has an adjustment of 0.001 thou. 6. It comes pre-fitted with a taper shank such as MT3, R8, ISO30, ISO40, as per requirement. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BT- MAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head Dia 38 mm (Non-Play) Kit with 8 mm Tools and Adaptor
    Read more
    Quick View
    Tool Included
    Boring Range (mm) Boring Hole (mm) Graduation Tool Shank Dia. 8 mm
    8–58 8 1 Div. = 0.015 mm CCMT06 Right Hand Tools
     
    Boring Range (mm) Boring Length (mm) Adaptable Insert
    8–38 24 CCMT06
    35–58 N/A CCMT06
     
    Ordering Code Shank / Adaptor
    BTBH0838-R8-IT2 R8 / M1TR (M12×1.5)
    BTBH0838-MT3-IT2 MT3 (M12×1.75)
    BTBH0838-ISO30-IT2 ISO30 (M12×1.75) ISO DIN 2080
    BTBH0838-ISO40-IT2 ISO40 (M16) ISO DIN 2080
    BTBH0838-BT40-IT2 BT40 (M16) BT–MAS 403
    BTBH0838-CAT40-IT2 CAT40 (5/8”) CAT ANSI B5.50
    BTBH0838-SS12-IT2 Straight Shank 12 mm
      1. Dia 38 mm Micro Boring Head Kit, a Mini Boring Head, is a small size boring head ideal for smaller spindle machines such as BT30, ISO20, etc. 2. The slide is hardened and ground which ensures its stable and sturdy and also increases the longevity of the unit. There are two vertical holes and a horizontal hole of 8 mm. 3. The vertical holes can bore from 8 mm to up to 58 mm. 4. The lead screw has an adjustment of 0.015 mm per division and is fitted onto a bronze nut which makes the system free of backlash. 5. It comes pre-fitted with a taper shank like MT2, MT3, R8, BT30, ISO20, or Straight Shank, as per requirement. 6. The boring kit comes with 2 nos. Dia 8 mm CCMT06 Right Hand Tools 7. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BTMAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Micro Boring Head Dia 62 mm R8-Integrated Kit
    Read more
    Quick View
    Tool Included
    Boring Range (mm) Boring Hole (mm) Graduation Tool Shank Dia. 12 mm
    10–125 12 1 Div. = 0.01 Set of 3 Indexable Tools
     
    Boring Range (mm) Boring Length (mm) Adaptable Insert
    10–12 40 TPGX0902
    12–100 50 TPGX0902
    92–125 N/A TPGX0902
     
    Ordering Code Shank / Adaptor
    BTBH1262-R8-IT3 R8 / M1TR (M12×1.5)
      1. Dia 62 mm R8-Integrated Micro Boring Head Kit with a boring capacity of 10- 125 mm is a rigid and versatile unit and is a must for any Tool Room workshop. 2. The Head and R8 Shank (drawbar thread of M12X1.5mm) part are integrated which reduces vibration to a greater extent and can be used in applications where rigidity and tolerances are important. 3. With two vertical holes of 12 mm, the unit can take tools with shank dia 12 mm (right hand tools) and one can also use the horizontal hole (with a left hand tool) for making larger bores. 4. The lead screw has an adjustment of 0.01 mm per division which gives an adjustment of 20 microns on the diameter. 5. The unit is hardened and ground to ensure sturdity and increased longevity 6. The Boring Kit comes with 2 nos. Right Hand Indexable Tools (TPGX0902) with shank Dia 12 mm and a Left Hand Tool 1. Entry Dia 10 mm X Boring Length 40 mm- 1 nos. 2. Entry Dia 12 mm X Boring Length 50 mm- 1 nos. 3. Entry Dia 92 mm TPGX0902- 1 nos. 7. Inserts are to be purchased separately depending on the material to be machined. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information 
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, BT40 (M16) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Special Boring Bar Dia 45.8 mm VBMT16 for Deep Boring
    Read more
    Quick View
    Tool Included
    Boring Range (mm) Boring Length (mm) Adaptable Insert
    Dia 45.8 mm 300 VBMT09
     
    Ordering Code Shank / Adaptor
    BTDBT-300L Straight Shank
    1. Special Boring Bar VBMT16 using other side for deep boring a size of 45.8 mm in SS304. 2. The boring bar was clamped on a Deep Boring Arbor with female thread coupling assisting in achieving lengths of up to 300 mm in a Special Purpose Machine. 3. The cutter has 4 working edges and designed in a way so as to enable maximum removal of chips using high-pressure coolant flow from the outside. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BTMAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View
  • Read more
    Quick View
    Compare
    Placeholder
    Micro Boring Head

    Twin Edge Rough Boring Head 104-124 mm CCMT1204 Inserts
    Read more
    Quick View
    Tool Included
    Boring Range (mm) Boring Length (mm) Adaptable Insert
    102–124 100–150 CCMT1204
     
    Ordering Code Shank / Adaptor
    BTRB-104 BT40 (M16×2)
    1. Twin Edge Rough Boring Head Dia 85 mm for size 104-124 mm with CCMT1204 Inserts. 2. The adjustment is 1 mm with minimum bore size 104 mm to maximum 124 mm. 3. Using bigger cartridges a size of up to 150 mm can be achieved. INSTRUCTION MANUAL- Please follow the instructions given with the kit to ensure proper usage and prevent damage Additional information
    Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BTMAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50
    Quick View