Micro Boring Head Dia 3″ with Adaptor

Micro Boring Head Dia 3″ with Adaptor

Technical Specifications:

● Boring range (mm) 3/4″ to 5″
● Boring Hole (mm) 3/4″
● Graduation 1 Div.= 0.001 thou

Inclusions:

1. Micro Boring Head Dia 3″ mm: 1 nos.
2. Shank (as per order/selection): 1 nos.

BTBH3

Description

Tool Included

Boring Range (mm) Boring Hole (mm) Graduation
3/4″ – 5″ 3/4″ 1 Div. = 0.001 thou

 

Ordering Code Shank / Adaptor
BTBH3″-R8 R8 / M1TR (7/16″)
BTBH3″-MT3 MT3 (M12×1.75)
BTBH3″-ISO30 ISO30 (M12×1.75) ISO DIN 2080
BTBH3″-ISO40 ISO40 (M16) ISO DIN 2080
BTBH3″-ISO50 ISO50 (M24) ISO DIN 2080
BTBH3″-BT40 BT40 (M16) BT–MAS 403
BTBH3″-BT50 BT50 (M24) BT–MAS 403
BTBH3″-CAT40 CAT40 (5/8”) CAT ANSI B5.50

 

1. Dia 3″ Micro Boring Head Kit is a sturdy unit for boring large
diameters. It can be used to bore sizes from 3/4″ to up to 5″.
2. This is very useful for boring deeper bores with depths of up to 3-1/4″.
3. The slide is hardened and ground which ensures its stable and sturdy and
also increases the longevity of the unit.
4. There are two vertical holes and a horizontal hole of 3/4″. The vertical
holes can take tools of shank dia 3/4″ and bore from 3/4″ to up to
5″. With an offset of 1″, the unit can bore a maximum diameter
of 6″ using a left hand tool in the horizontal hole.
5. The lead screw has an adjustment of 0.001 thou.
6. It comes pre-fitted with a taper shank such as MT3, R8, ISO30, ISO40, as per
requirement.

INSTRUCTION MANUAL- Please follow the instructions given with the kit to
ensure proper usage and prevent damage

Additional information

Shank/ Adaptor R8/M1TR (M12X1.5), MT3 (M12X1.75), ISO30 (M12X1.75) ISO DIN 2080, ISO40 (M16) ISO DIN 2080, ISO50 (M24) ISO DIN 2080, BT40 (M16) BT- MAS 403, BT50 (M24) BT- MAS 403, CAT40 (5/8”) CAT ANSI B5.50

Reviews

There are no reviews yet.

Be the first to review “Micro Boring Head Dia 3″ with Adaptor”

Your email address will not be published. Required fields are marked *